130BBL Low Center of Gravity

130 BBL Non-Code Vacuum Tank Trailer

130 BBL Non-Code Vacuum Tank Trailer

SPECIFICATIONS

  • Type: Vacuum Tank Trailer, Non-Dot Spec
  •  Capacity: 5460 Gallons, Plus 2%
  •  Icc Mc: None
  • Commodity: Unspecified Oilfield Fluids
  • Design Pressure: 15 Psi Internal, 22 Inhg External,
    P23 Psig Hydrostatic Test
  •  Shell: 1/4 Pl X 60 In O.d.
  • Head: 1/4 Pl Non Code Asme Shape
  •  Baffle: 2 – 1/4 Pl Flat Flanged And Dished Each
    With Interior Shell Reinforcement Ring
  • Stiffener: 3/8 X 2 1/2 Rolled Rings (9) External
  •  Welds: Internal Root, External Submerged-Arc
  •  Compartment: Single
  • Suspension: Two – Watson-Chalin 30,000 Lb.
    Air Ride With Single Leveling Valve And Manual
    Dump Valve, Bolt On Steel Suspension Assembly,
    60,000 Lb. Capacity System
  • Axles: 25,000 Lb Round W/Outboard Drums (2)
  • Wheels: 10 Hole Steel Disc Hub Pilot
  • Tires: 11.00 X 22.5 Radial
  •  Brakes: 16 1/2 X 7 With Spring Parking, Auto
    Slacks, Abs Both Axles
  • Upper Coupler: Bolt On Adjustable
  • Landing Legs: 2 Speed, Heavy Duty, High
    Capacity Lift
  • Bumper: 4 X 8 Tube With Tow Eye Fenders 25 Ft
    Length Formed Alum.hose Pan (1/8”Thk)
  • Walkway: Driver’s Side Full Length Walkway With
    Handrail And Ladder, 1/4” Formed Supports,
    Along With Rear Step Up Access.
  • Tool Box: 18 X 18 X 30 On Drivers Side With
    Sealed Door
  • Mud Flaps: Anti Sail
  • Outlet: Two 4” Butterfl y Valves At Rear With A
    Wedge Sump
  • Reliefs: 1 1/2” Vacuum Relief, 2” Pressure Relief,
    Both Located At Top Front Of Barrel, 2” Blow
    Down Line.
  • Manways: (4) Located On Top, One On Rear
    Head, All 21” Domed Style With Plated Swing
    Bolts And Wing Nuts
  • Shut Off : Ball Type Primary In Front Manway,
    Ball Type Secondary 12 Gal On Drivers Side Front
    With Drain
  • Lights: Full Dot Lights, Sealed Lights, Harness
    And Junction Box With Terminal Strip, Two Rear
    Work Lights With Integral Switches
  • Sight Glass: 2” Full Sight Glass Fittings At Rear
    Head. 1 1/2” Plastic Sight Glass Tube Installed In
    Rear Head With Clean Out Tees And 2” Ball Valve
    At Bottom.
  • Coating: All Surfaces White Metal Steel Grit
    Blast, 2.5 Mil Profi le (Sp-10), Interior Lined With
    Chemical Resistant 100% Solids Epoxy Liner,
  • 10-15 Mil Dry Film Thickness. Exterior Coated
    High Build Epoxy Primer And Color Coated
    With High Solids Polyurethane, 4-6 Mil Dry Film
    Thickness.
  • Full length frame for structural integrity.

LITERATURE

Speak with one of our dedicated sales staff to learn more 877.231.8198