Frac Blender
Mobile Blending Unit

SPECIFICATIONS

The Dragon 100 Barrel Blender is designed to integrate a slurry of water, sand, dry chemicals and liquid chemicals to provide the desired fracturing components.


Maximum working Fluid Rate: 100 BPM (4200 GPM)
Maximum Discharge Pressure: 80-100PSI
Dimensions: (dimensions may change depending on chosen chassis)
Length with sand hopper up: 43’-3” (13.2m) down: 44’-11” (13.7m)
Width: 8’-2” (2.5m) • Height: 12’-4” (3.8m) • Weight: 55,000 lbs (24,950 kg)


CHASSIS SPECIFICATIONS:

Steel rear dual axle fenders
Front & Rear oil-field bumper with tow loops
LED chassis lights and work lights


POWER UNITS:

Road motor 605Hp with FABCO Transfer case
375 HP John Deere deck engine with (4) Pad Funk Drive & 100 Gallon Fuel Tank


SUCTION/DISCHARGE PUMPS:

12″ x 12″ centrifugal pump (suction)
12” Suction and Discharge Manifolds with (12) 4” 206 subs
8”  MAG Flow-Meter on Suction Piping
12″ x 14″ Centrifugal pumps (Discharge)
8” MAG Meter on Discharge Piping with Pre-Fabricated Blank to Add a Turbine Flow-Meter


HYDRAULIC SYSTEM:

Hydraulic Auger Positioning System
Hydraulic oil cooler with 160 gal Hydraulic oil reservoir
Close Circuit Hydraulic Pumps for Augers and Suction Pump
Hydraulic Pump for Auxiliary Functions
Hydraulic Hoses


BLENDING SYSTEM:

72” Mixing tub with Impeller (16 BBL Volume)


SAND DELIVERY SYSTEM:

Dual 12” hydraulically driven sand augers
Single 6” hydraulically driven sand auger
Large in-feed hopper


DRY-ADD SYSTEM:

Dry-add hoppers with 4” auger and jet mixer
Dry -add hopper with 2″ auger and jet mixer


CONTROL PANEL:

Full-Control and Storage Deck

Air-Actuated Tub Drain

Steel Control Panel

Gauges and Controls Include:

  • Engine Start/Stop/Throttle, Display Modules with Hours, Fault Codes, Oil Pressure and Coolant Temperature
  • Auger Speed Controls and FWD/REV Switches
  • Liquid Chemical Pump Speed Controls with Flow/Total Displays
  • Two Dry Chemical Feeder Speed Control with Flow/Total Displays
  • Tub Paddle Speed Control
  • Auger Lift Control
  • Engine Kill Switches
  • Light Switches
  • Hydraulic Temperature and Pressure Gauges
  • Suction Pump Hydraulic Pressure Gauge
  • Auger System Hydraulic Pressure Gauge
  • Suction/Discharge Pump Speed Controls with Flow/Total Displays

OPTIONAL EQUIPMENT:

Mounting Racks on Back Bumper
Wash down spray hose
Additional Hose Racks
Operator Enclosure with Heating and A/C
Chemical Add System


PAINT:

Paint color specification to be supplied by customer, two color maximum. Additional colors are available for an additional charge.

Pumps & Stimulation Equipment

Your Name (required)

Your Email (required)

State

Subject

Your Message

Call 800-231-8198

Contact Us Now